#PLANTRONICS HUB DISABLE STARTUP HOW TO#
#PLANTRONICS HUB DISABLE STARTUP SERIAL#
#PLANTRONICS HUB DISABLE STARTUP DRIVERS#
#PLANTRONICS HUB DISABLE STARTUP UPDATE#

The error can occur due to different reasons. The following suggestions were found by internet search in November 2020 ( Invalid Configuration Descriptor solution): This is a Windows error that is not directly related to FinePointe software or the hardware drivers.

#PLANTRONICS HUB DISABLE STARTUP SERIAL#

Going to the Windows Device Manager will show a screen similar to this:Īll FinePointe Controllers should appear under the 'Buxco Products' header near the top, but if your device cannot be detected by FinePointe it may appear under 'Universal Serial Bus controllers' as an 'Unknown USB Device (Invalid Configuration Descriptor)'. This could happen suddenly after a Windows Update. Should you have any related issues, you can let us know in the comment.Computer will not recognize the FinePointe Controller that is connected via USB and turned on. Those are the solutions to Unknown USB Device Set Address Failed. Uncheck the Turn on fast start-up (recommended). Click Change settings that are currently unavailable.ĥ. Click Choose what the power button does.Ĥ. Type cpl and press Enter to directly open Power Options.ģ.

#PLANTRONICS HUB DISABLE STARTUP UPDATE#

You just need to go to Start > Settings > Update & Security > Troubleshoot > Hardware and Devices, and then follow the on-screen guide to do the job. You can also use the Hardware and Devices Troubleshooter to get rid of the Unknown USB Device Set Address Failed issue. Solution 3: Use Hardware and Devices Troubleshooter

#PLANTRONICS HUB DISABLE STARTUP HOW TO#

If you need to roll back the device driver, you can refer to this post: How to Roll Back a Driver in Windows? A Step-by-Step Guide.

#PLANTRONICS HUB DISABLE STARTUP DRIVERS#

If you need to update the device driver, you can refer to this post: How to Update USB Drivers Windows 10/11.

You need to verify which situation you are facing and then choose to update or roll back the USB device driver. On the other hand, this issue can also happen after you update the device driver. If the USB device driver is not up-to-date, the Unknown USB Device Set Address Failed error can appear. Solution 2: Update or Roll Back the USB Device Driver Scroll down to the USB settings section and then set Disable for both the scenarios: On Battery and Plugged in.Ħ. Click the Change advanced power settings link to continue.ĥ. Click the Change plan settings link that is next to the preferred plan the system selects.Ĥ. Type powercfg.cpl and press Enter to directly open Power Options.ģ. You can follow these steps to modify Power Options:Ģ. If you are using a laptop, you need to check whether the setting in Power Option is set correctly.

Use Hardware and Devices Troubleshooter.

How to solve unknown USB device set address failed? If you are sure the exact reason for this issue, you can try these solutions one by one until you find the most suitable one for your case. Of course, if you are using other brands of USB devices, they can also work.

These solutions are available for WD my passport set address failed, Seagate external hard drive set address failed, and SanDisk set address failed. In this post, we will show you some solutions. MiniTool Software hasn’t talked about the Unknown USB Device Set Address Failed issue.

Unknown USB Device (Set Address Failed).

Unknown USB Device (Device Descriptor Request Failed).

Then, you can check whether there is something wrong with the drive. Sometimes, when you connect an external USB device like a WD my passport, Seagate external hard drive, or SanDisk drive to your computer, you may discover that the drive doesn’t work. SanDisk/Seagate External Hard Drive/WD My Passport Set Address Failed

Solution 3: Use Hardware and Devices Troubleshooter.

Solution 2: Update or Roll Back the USB Device Driver.

SanDisk/Seagate External Hard Drive/WD My Passport Set Address Failed.To solve this issue, we collect some useful solutions and show them in this post. When you encounter the Unknown USB Device Set Address Failed error, you will be unable to use the USB as normal.

Plantronics hub disable startup